Spisom Bena app icon Kiln glass planner for iOS

Spisom Bena: see the fired glass before the kiln does

Stack your layup, compare cold and fired outlines, check the shelf, and read the firing schedule. All on your iPhone, all offline.

Download Spisom Bena

A firing eats hours of kiln time. Spend two minutes on the plan first.

Choose your first check

Which firing question keeps you up at night?

Pick one. Each card gives you a short tag to paste into a run note, plus the part of Spisom Bena that answers it.

Layup check Do this before the lid goes down

Know the fired thickness first

LAYUP-FIRED
  • Compare cold and estimated fired cross-sections
  • Flags for mixed expansion, trapped air and thin centres
  • Switch between tack, contour and full fuse
Download Spisom Bena
Shelf check

Keep every piece clear of its neighbour

SHELF-CLEAR
  • Round or square shelf sized to your kiln
  • Clearance checks against neighbours and the shelf edge
  • Drag a piece to move it, tap to open its stack
Download Spisom Bena
Slump check

Make sure the blank sits inside the mould

SLUMP-FIT
  • Mould fit check with a margin readout in millimetres
  • Second-firing schedule for slumping
  • Temperatures in Celsius or Fahrenheit
Download Spisom Bena

Not a promotion. Spisom Bena lists no bonuses, deposits or spins, and the tags are only note shorthand for your firing log. Predictions and schedules are planning estimates, so check them against your glass manufacturer's guidance and your own kiln.

Toolbox

Six tools on one workbench

Spisom Bena is built around one loop: draw the piece, predict the fire, place it on the shelf, then record what really happened.

Layered layup builder

Choose a base shape and size, then stack coloured glass sheets and accent forms layer by layer.

Cold versus fired

Compare the cold outline with the estimated fired outline and cross-section in tack, contour or full fuse.

Risk flags

Get warned about mixed glass expansion, trapped air, thin centres and edges that change during the fire.

Kiln shelf layout

Arrange pieces on a round or square shelf and see which one sits too close to a neighbour or the edge.

Schedule and mould fit

Read ramp rates, holds, annealing and cooling as a curve or segment table, plus a second firing for slumping.

Firing record and card

Save runs with notes and verdicts, compare cold and fired photos, mark faults and export a firing card.

Under the lid

How the estimates take shape

You begin with a base shape and a size, then add sheets and accent forms as layers. Spisom Bena shows the stack as a cold outline and cross-section, then redraws it as an estimated fired outline so you can see how the edges pull in and the thickness settles.

The mode switch changes the picture. Tack, contour and full fuse each give a different fired result, so you can test the same layup three ways before spending kiln time. Flags appear when the layup mixes glass with different expansion, may trap air, leaves a thin centre, or has edges that will keep changing.

From there the app follows the piece to the shelf and the schedule. It checks clearance against neighbours and the shelf edge, suggests a firing schedule in Celsius or Fahrenheit, and for slumping it checks the mould fit and offers a second-firing schedule. The numbers are planning estimates, not promises.

Verified specifications
App nameSpisom Bena
CategoryGraphics & Design
PlatformiOS (iPhone)
Version1.2
Latest updateBug fixes and performance improvements
Shelf shapesRound or square
Temperature unitsCelsius or Fahrenheit
ConnectivityWorks offline
Data storageProjects and photos stay on your device
ExportFiring card to your photo library
Store ratingNot yet rated
Price and sizeShown on the App Store listing
Page checked18.11.2026
Studio routine

From layup to firing card

A typical session in Spisom Bena follows the same order you follow at the bench.

Before you cut glass

  • Pick a base shape and size for the piece.
  • Add coloured sheets and accent forms in the order you plan to stack them.
  • Open the cold and fired cross-sections and read the fired thickness.
  • Check the flags before you commit to the layup.

Before you load the kiln

  • Set the shelf to round or square and size it to your kiln.
  • Drag pieces into place and look for the red "too close" outline.
  • Open the suggested schedule as a curve or segment table.
  • Pick Celsius or Fahrenheit to match your controller.

When the piece is going to slump

  • Choose the mould the glass will slump into.
  • Read the fit check: piece size, rim size and margin in millimetres.
  • Open the second-firing schedule for the slump.

After the kiln cools

  • Save the firing run with notes and a verdict.
  • Set the cold and fired photos side by side.
  • Mark any firing faults, using the built-in library as a reference.
  • Export a firing card with the schedule, pieces and photos.

Plan the firing, then close the lid

Spisom Bena 1.2 is an iOS app. Price and file size are on the App Store listing, and the install runs straight from there.

Download Spisom Bena

Made for iPhone. Age rating, in-app purchase details and any ad information are listed on the App Store page.